Meskers
14 Gauge Bullet Door is rated by Underwriters Laboratories for Level I,
II & III openings. During testing our bullet door would not allow a
.44 Caliber Magnum shell to pass through, even fired at close range.
The door is constructed identically to our standard 14 Gauge Door with
the addition of a 14 gauge backup plate welded to the inside face of
the pan. Mesker's Bullet Door is ready to protect you from increasingly
hostile environments.
ADVANTAGES
The
14 Gauge Bullet Door is a Level 4 extra heavy duty door, and are built
for openings that endure a high level of traffic and abuse. Prime
painted at the factory and ready for hardware and installation when
shipped.
CLOSER REINFORCEMENT: Every 14 Gauge Bullet Door is furnished with a closer reinforcement box.
EXTRA LONG LIFE: The key to sag resistance is the extra long 3/16 hinge reinforcement.
YOUR CHOICE OF FOUR CORES: Polystyrene, Honeycomb, Urethane, and Fiberboard.
LOCK REINFORCEMENT: Can
be prepared for Govt. 161 cylindrical locks with a 2 3/4 backset (ANSI
A115.2 lock front), or a Govt. 86 mortise lock with a 2 3/4 backset
(ANSI A115.1 lock front). Also available preped for sectional
trim, panic and electronic devices.
HEMMED EDGE: The hemmed edge offers an extra smooth transition between faces.
UNIVERSAL HANDING: 14 Gauge Bullet Doors fit both right and left hand openings, due to the double hole pattern and reversible filler plate.
Mesker's Bullet Door is ready to protect you from increasingly hostile environments.
